<!-- TITLE: Genmitsu 3018 Pro Cnc --> <!-- SUBTITLE: A quick summary of Genmitsu 3018 Pro Cnc --> # Genmitsu 3018-PRO CNC Router DIY Kit https://www.sainsmart.com/products/sainsmart-genmitsu-cnc-router-3018-pro-diy-kit We have a fully assembled one of these, and it looks like it has upgraded steppers and a much beefier spindle. The driver is the Woodpecker CanxTool https://himalayansolution.com/product/woodpecker-cnc-camxtool-v3-4 As of 3/21/2025, the board boots to GRBL 1.1f and accepts commands. Using the python program bCNC, I was able to home the device and move each stepper and the spindle. Seems like it's in working condition. Need to actually mill something and see what happens. The power supply is a a 24V 5A brick and the USB A - USB B mini cable ought to be cable-manged with it. The power button on the driver board is just a white clicky thing and easy to miss. Hopefully I will bring this up to a usable state. The spindle has a noticable wobble, more than 2mm if I had to guess, maybe more like 5mm. It's bad.